National 36 In. x 12 Ga. Air Shear - NA3612
Lowest Price Guarantee! - We beat all competitive quotes!**
The National NA3612 - 36 In. x 12 Ga. Air Shear features a 36" x 12 Ga. mild steel (16 Ga. stainless) shearing capacity and is expertly built in the USA, with a lifetime warranty and the quality serious metal fabricators demand. The NA3612 ships with spring actuated hold downs, front sheet supports, manual back gauge, heavy-duty foot switch and a front table square with 1/16" increment length scale. An optional 57" front squaring arm is available.
The NA3612 Air Shear from National is designed for precise shearing through a full 36 inches of 12 gauge mild steel at up to 40 strokes per minute. This shear is also recommended for shearing aluminum, plastic, copper, brass, lead and a range of composite materials. The NA3612 ships with spring actuated hold downs, front sheet supports, manual back gauge, heavy-duty foot switch and a front table square with 1/16" increment length scale. An optional 57" front squaring arm is available.
The cutting heads on National shears are constructed from D2 steel, a high carbon, high chromium alloy that offers extremely high wear and abrasion resistance. Both upper and lower blades have been ground and sharpened on all four sides, doubling the working life of the shear versus the more common two-sided blades from other manufacturers. National machinery offers superior strength and durability with a body constructed of welded steel plates, a much stronger design over the cast iron frames commonly used by the industry.
Made in the USA and backed by a full five year warranty and a lifetime warranty against breakage on the cutting heads and table, the National 36 In. x 12 Gauge Air Shear is expertly built with simplicity in design and the quality that serious fabricators demand.
- Capacity, Mild Steel - 12 Gauge @ 55,000 PSI Tensile Rating
- Capacity, Stainless Steel - 16 Gauge @ 55,000 PSI Tensile Rating
- Maximum Working Length - 36″
- Strokes per Minute - 40 (Approximate)
- Power Type - Air
- Recommended Air Supply Pressure - 100 PSI
- Weight - 1,100 Lbs.
- Foundation Bolt Pattern - 41-1/2" x 18-3/4"
- Floor Space with Back Gauge - 45” x 75-7/8” x 42-1/4”
- Floor Space without Back Gauge - 45” x 22-3/4” x 42-1/4”
|Working Length||3 Ft. / 36 In.|
|Capacity, Mild Steel||12 Ga. | 7/64" | 0.109375"|
|Manufacturer||National Sheet Metal Machines|
|Country of Manufacture||United States|