National 6 Ft. x 16 Ga. Powered Slip Roll - NR7216
Lowest Price Guarantee! - We beat all competitive quotes!**
The National NR7216 - 6' x 16 Ga. Powered Slip Roll features a 72-1/4" x 16 Ga. mild steel roll forming capacity and is expertly built in the USA, with a lifetime warranty and the quality that serious metal fabricators demand. Designed to provide simple and straightforward operation, the NR7216 powered slip roll features three power driven rolls, each measuring 4" in diameter, that have been precision turned, ground and polished from high carbon steel. The National 6' x 16 Ga. Powered Slip Roll ships complete with a heavy duty steel storage stand. Optional wire groove rollers are available.
The National NR7216 - 6' x 16 Ga. Powered Slip Roll Former is designed to provide simple, straightforward operation. This machine features three power driven rolls, each measuring 4" in diameter, that have been precision turned, ground and polished from high carbon steel. Roll forming operations are easily controlled by an on/off foot switch and a forward/reverse switch. The forming rolls are driven by a 1 HP motor, available in choice of voltage and phase, connected by a positive chain drive to a heavy duty reduction gear box.
The design of the NR7216 features extra heavy duty end frames and a quick realease upper roll controlled by a handle located at the front right of the machine for fast production. Precision roll adjustment is achieved by turning the hand wheel on the left end of the roll. Repeatability is maintained by a forming scale located above the hand wheel. A front guard provides additional safety and a heavy duty storage stand is included standard. The electric panel and gear box are housed in a ventilated cabinet for added protection.
Made in the USA and backed by a lifetime warranty, the National 6' x 16 Ga. Powered Slip Roll is expertly built with simplicity in design, reliable roll forming capability and the quality that serious fabricators demand.
Specifications
- Capacity, Mild Steel - 16 Gauge @ 55,000 PSI Tensile Rating
- Maximum Working Length - 72-1/4″
- Minimum Forming Radius - 2"
- Roll Diameter - 4"
- Number of Rolls - (3)
- Driven Rolls - (3)
- Wire Grooves - (Optional) 3/8", 1/2", 5/8"
- Roll Speed - 18 RPM / 18.84 SFPM
- Power Type - Electric
- Electrical Specs - Choice of 110 or 220v, Single Phase, 1HP Motor -or- 220 or 440v, Three Phase, 1HP Motor
- Weight - 1,740 Lbs.
- Foundation Bolt Pattern - 83-1/2" x 24"
- Floor Space - 88” x 26” x 43-3/4”
SKU | NR7216 |
---|---|
Weight (Lbs.) | 1740.0000 |
Power Type | Electric |
Working Length | 6 Ft. / 72 In. |
Capacity, Mild Steel | 16 Ga. | 1/16" | 0.0625" |
Manufacturer | National Sheet Metal Machines |
Country of Manufacture | United States |